Articles from: September 2021

Your Mouth Is A Deciding Factor For The Suuitability Of An Instrument

Before your child starts playing a kind of musical instrument, particularly a wind instrument such as a clarinet or saxophone, a New York orthodontist strongly recommends that you check first with your dentist.

According to this orthodontist, there is a connection between individual’s dental problems and the kind of musical instruments that they play.

In one issue of the Journal of the American Dental Association, he argues that American children by the millions are merely playing instruments randomly assigned to them in their music classes in schools.

Thousands of children are not meant to play certain instruments because of dental or temperamental reasons.

As a result, musicians would end up being handicapped from the start and only play the instrument with average skill.

A good dentist should be able to tell patients involved in playing of musical instruments how certain wind instruments may be the root cause of certain dental problems.

Before pursuing a musical instrument, it is advised that children and parents first seek advice from a dentist.

Dental specialists point fingers at reed instruments as being responsible for a lot of cases involving body tissue illnesses experienced by wind instrumentalists.

This is because a lot of the instrument’s weight is put upon the lower lip which is supported by the teeth.

If you continue to put too much weight on the teeth, you could lessen the amount of blood that is needed to flow into the affected bone area.

The lower jaw muscles might also have a tendency to create outward pressure against some of the upper teeth, causing a misalignment of the teeth.

Your teeth are pressed upon by the lips if you play a brass instrument like a trumpet or trombone. There may be movement of the teeth that shouldn’t exist if these instruments are played always for long periods.

The oboe or bassoon is not a recommended instrument for one with irregular front teeth because he could suffer lip pain, nor is the flute recommended with a person who has a short upper lip.

Some string instruments also have strong potential for dental problems. He says that previously done studies point to continuous violin playing as a cause of faulty bite since a lot of pressure is applied to the jaw as it holds the violin against the shoulder.

Dental problems may be avoided if the would be musician would have an oral examination, especially of his tongue and lips. He says that when recommendations are given and given early, then musicians would not have much problems playing the musical instrument they desire to play.

Starting your dental checkups very early is never a disadvantange, in fact you should so you don’t end up with problems later on.

Seeing your dentist before going and playing a musical instrument that needs the mouth to operate is a must. Any other activity or recreation that makes use of the mouth should be a sign for you to see your dentist first.

Buying Concert Tickets Online.

While there has been a lot of controversy around recently about some of the more seedy aspects of buying tickets for concerts, or for that matter any other form of major event, through the Internet is very important to understand what is allowed and what isn’t when it comes to booking a place at a forthcoming concert where the buyer knows that the tickets are liable to be snapped up very quickly.

Lets be honest, well it could be even quicker a lot of fun camping out for two or three days to make sure to be first in line when the tickets for your favourite band went up for sale, not everyone has a luxury to devote so much time and relative inconvenience to make it happen. Thats why its become so popular to buy tickets online. What the buyer has to make sure of, however, is that they are buying the tickets through an authorised ticket office and not through some kind of online scalper.

These days the big bands and artists tend to be a lot less spontaneous than they were even ten or fifteen years ago, with tour organisers and promoters planning their circuits many months in advance and advertising accordingly. That means that anyone who wants to make sure of being there has enough time to plan and make sure they have the tickets in plenty of time. Tour promoters will usually appoint a number of ticket selling agents either in the city where the concert will be held as well as in local towns and cities if the artists appearing are a major international act and they are liable to fill a major venue.

Tour promoters are among the most Internet savvy people you will find around these days, and they will put up large blocks of tickets to be sold online directly, although everyone will be asked to pay the same price.

What an online buyer has to take into account is that while buying their tickets online might suit them down to the ground in terms of convenience they cannot allow themselves to become too complacent. Generally the tour promoters will launch the online ticket sales at exactly the same time as they open the doors for the ticket agents to sell the tickets physically.

Thanks to the ability to tightly coordinate ticket sales electronically across a wide number of venues in real time its first come first served, whether you are sitting in the comfort and security of your own home, or have been waiting in line in a queue for two days. Those who know how to take advantage of the wonders of the Internet will be logging in at the very moment that the tickets go on sale to ensure that they have the best possible seat to see and hear their heroes in action.

The Pros And Cons Of Buying Medical Instruments Online

If you are a medical professional, you would need different medical instruments for you to be able to do your job properly. Amongst the things that medical professionals need are stethoscopes, surgical tools, face mask and a lot more. When it comes to stethoscopes, the popular brand is the Littmann Lightweight II S.E. Stethoscope or you can also check for some stethoscope reviews before buying one especially if you plan to buy online.

If you plan to buy online, here are some of the pros and cons of buying medical instruments online:

The Issue of Quality

If you plan to buy online, make sure that you check out the website first to find out if such website is licensed to sell different types of medical instruments. This is to make sure that you are getting quality equipment. If the website is licensed, then you would be able to get warranties in case the instruments are defective or if there is something wrong with it. This will certainly help you in terms of saving a lot of money.

The Wide Selection

Another thing that you might consider as a pro in terms of buying medical instruments online is the fact that you would get a lot of choices. You also get to pick the most recent medical instruments as compared to buying it in stores. One con though is the fact that you would not be able to examine the instrument and you would just have to rely on what the online stores say about their products or better yet, look for some reviews to help you out.

Reliability?

Buying medical instruments online may offer advantages but you would also have disadvantages. As an example, in case you buy your instruments from an unreliable source or online shop, then what would happen is that you would surely end up wasting your money for something that is not worth anything. To make sure that you would not have problems when buying medical instruments online, be sure to look for reliable websites so you can be assured of quality medical instruments.

Weighing the Pros and Cons

Buying stuff online offers pros and cons and as a buyer, you need to be aware of these things so you would know whether or not it is a good idea to buy medical instruments online.

This specific type of stethoscope is the most trusted one by most medical professionals so you might want to make sure that you have your very own Littman stethoscope. You can also buy this online as long as you get them from reliable sites.

Instruments And Methods For Pressure And Flow Calibration

Pressure is an important process variable because it sets critical conditions for boiling, chemical reactions, distillation, extrusion, vacuuming, and conditioning of air. Incorrect pressure or flow rate can cause major safety, quality, and productivity problems. Very high pressure or flow rate inside a sealed environment can also cause an explosion. In order to ensure that plants operate efficiently and safely, periodic calibration of pressure, level, and flow instruments is required.

Many factories and metrology laboratories use various pressure and flow-meter calibration instruments. This high-accuracy equipment is used to calibrate industrial devices like pressure transducers, pressure gauges, and transmitters, as well as instruments that measure and control flow.

Some of the important types of devices used with pressure calibrators are:

1) Pressure gauges: They are instruments used to measure pressure in liquids and gases. Some of the commonly used pressure gauges are glycerin gauges, electric contact gauges, differential gauges, test gauges and capsule gauges. These are usually used in commercial production plants.

2) Calibration standard pressure sensors: These pressure sensors, usually consisting of differential pressure manometers, gauges, pressure controller, transmitters, and vacuum gauges are very precise and are sometimes used in calibration standard labs for secondary reference.

3) Pneumatic calibration hand pumps: These pressure calibrators manually produce air pressure set points. Then, these are used to calibrate pressure equipment with the help of a pressure indicator.

4) Pressure calibrators utilizing electrical measurement: These measure electrical current as well as voltage in order to show the output signal produced by a pressure transducer.

5) Digital test gauges: These gauges are installed on both hydraulic and pneumatic calibration hand pumps to determine pressures with precision.

6) Precision manometers: These pressure calibrators are handheld instruments, which provide a selection of pressure units. They are powered by batteries.

7) High pressure calibration hand pumps: These instruments produce pressure in order to calibrate a test gauge or connect to an indicator.

For any transducers or measurement systems, which provide information on the amount of material transferred in a given time, flow meter calibration is necessary. In flow-meter calibration, measurements usually occur in units of mass per unit time (gravimetric measurement) or volume per unit time (volumetric measurement). These two types of measurements relate to one another by the density (mass per unit volume) of the flowing material. This third method is called comparison measurement.

Dental Evaluation Necessary For A Child Playing A Wind Or String Instrument

One particular orthodontist from New York is advising parents to first check with a dentist whether their child should or shouldn’t start playing a wind instrument. This dentist explains that a number of dental problems are a result of the instruments that one plays. Not much thought is really given to the kind of musical instruments kids play, the orthodontist explained in a recent issue of the Journal of the American Dental Association.

Eventually, the children will discover that the instrument does not really fit them dentally or temperamentally. Many would wind up as handicapped musicians playing only on a mediocre level. Certain dental problems are caused by wind instruments, and so every good dentist must keep would be musicians, teachers, and parents about these things.

A child and his parents must seek out the dentist’s advice before making the decision that is is sure to cost time, money, and effort. A lot of dentists agree that many cases involving body tissue illnesses are because of the playing of single reed instruments by wind musicians. This is because you place much of the instrument’s weight on your lower lip which gets its support from your teeth. Continuous pressure on the teeth prevents a constant flow of blood from entering into the affected bone area.

He said the strong muscles of the jaws also unintentionally increase the outward pressure against some upper teeth which can harm the current proper teeth alignment. The playing of brass instruments also causes the lips to press against the lower and upper teeth. He said extended periods of playing these instruments have caused some mobility or unnecessary movement of the teeth. Those with irregular or sharp front teeth may experience pain on their lips when they play the oboe while those with short upper lips would have a difficult time playing the flute.

There is also a possibility of acquiring dental problems through the playing of string instruments. He said previous studies have shown that continuous violin playing causes much pressure on the jaw, especially the part which holds the violin against the shoulder, and this may lead to a faulty bite in some people. Dental problems may be avoided if the would be musician would have an oral examination, especially of his tongue and lips. Your handicap as a would be musician would be solved through the proper recommendation of your dentist given early to ensure dental suitability and oral health.

The best way to avoid any major problems later on in life is to get checkups early on. This is more true when it comes to playing music with wind instruments. Whatever the activity, as long as your mouth and teeth are involved, go see your dentist.

Authentic And Genuine Singer Sewing Machine Parts

Are you looking for genuine but affordable sewing machine parts? Singer sewing machine parts is the only brand that could satisfy to your needs. It has been tested for so many years already even before some of us were born. They offer a wide range of sewing machines and also its parts. They have the most durable and authentic parts of a sewing machine. It could even last for a long time.

Some of the parts that you may need to keep your machine going include the following: singer balance wheel, bobbins, sewing machine oils, needles, bobbin winders, bobbin cases and light bulbs. Other parts that you may be looking for are: feed dogs, needle plate, foot and transporter, foot pedal or treadle or the foot controllers, knives and loppers for the serger, overlock and button hole machines and tension parts assemblies.

There are two main reasons to buy singer sewing machine parts:

1.Durability – Durability always comes first and proper maintenance will be very helpful. Remember, the word “proper maintenance”, it just mean a very careful way of cleaning the parts to avoid too much friction on the parts of the machine. Avoid excessive damage on the motor and this can be mainly due to the different fabric.

2.Quality – No question when it comes to durability. The name of Singer has been tested for almost 80 years now since its first release. How funny it is to think that even the clothing of your grandparents can be sewed from a Singer sewing machine. The quality of the whole machine is attributed by the quality of its parts which are also Singer sewing machine parts. The Singer Machine Company is the leading company in this field and they always assure that the machine you have purchased can be passed on to your next generation and not only the hobby of sewing.

The name Singer always carries a good quality and durability. The corporation has a wide array of products from compact, embroidery, electrical, industrial sewing machines to sewing machine parts.

With all the availability of these parts it makes you restore you’re old singer sewing machine and make them function like a new one. So, you don’t anymore need to buy new sewing machine thus additional money to your savings. The Singer Corporation is eventually the biggest manufacturer of sewing machines and sewing machine parts and has become the first company to soar internationally.

Jessie J Tops Bbc Sound Of 2k11 Pop Singer And Songwriter

Today in its ninth year, previous winners include Ellie Goulding, Very little Boots, Adele, Mika and Corinne Bailey Rae.
Jessie J has already enjoyed success to be a songwriter, co-writing Miley Cyrus’ hit Party in the us.

The 22-year-old launched her own solo career at the end of 2010, making it into the UK top 30 with her debut single Exercise Like A Dude.

Signed to Island Records in the uk – home to Amy Winehouse, U2 and Florence as well as the Machine – her music is a mix regarding attitude-filled urban pop and big soulful ballads.

She starred on the West End stage at the age of 11 and spent a year at the Brit Education for performing arts, in the same year while fellow singers Adele, Katy B and Rox.

Jessie J said she was “overwhelmed” at coming top of the Sound of 2011 list.

“It feels amazing for being accepted on such a broad scale, ” the girl said. “I know I’m doing something right and I’ve have to keep doing it. It’s an honour. ”

The Brit Awards have in addition given the singer the Critics’ Choice accolade, which she’ll accept at the ceremony at the O2 arena working in london in February.

“The expectation of me at present is so high, but I thrive on understanding people have that expectation, ” she said. “It’s challenging. ”

Austin Daboh, music manager at BBC 1Xtra – the initial radio station to play Jessie’s music – mentioned: “From the minute I saw a homemade training video of Jessie singing her head off, I believed she was a talent.

“I think she combines a distinctive charisma with great songwriting and to top it off she’s an incredible voice. ”

Lana Webb, head regarding music at Remedy Productions, who make shows to get Channel 4 and MTV, said: “Jessie J features already proven her songwriting credentials.

“With her strong voice, commanding stage presence and razor sharp type, Jessie J will cut across the musical landscaping, seizing the spotlight for herself in 2011. ”

2009, Ellie Goulding came top of the Sound with 2010 list, and was joined in the top five by Marina and also the Diamonds, Delphic, Hurts and The Drums.

The Famous Optical Artist – Bridget Riley an Op Art Pioneer

One of the major Optical Art (Op Art) proponents, British artist and printmaker Bridget Riley was born on the 24th of April, 1931 in London. Riley is most commonly known for her signature black and white oil paintings depicting geographic patterns that cause optical illusions which have become synonymous with the Op Art movement.

Bridget Riley was educated at the Royal College of Art from 1952 to 1955 and in these years her paintings were semi-impressionist and figurative. It was not until the 1960s that her signature style developed.

Riley’s black and white forms – painted in oil paint on canvas – gave viewers the impression of movement and colour due to optical illusions. Works such as -Movement in Squares- (1961), -Black to White Discs- (1961-62), -Loss- (1964), -Blaze 4? (1964), -Drift No. 2? (1966) and -Cataract 3? (1967) typically possessed such characteristics.

Bridget Riley’s paintings also had another feature – the potential for increased audience participation in the appreciation or display of the work of art. This was a hot topic in the 60s, when many performances were being classified as -happenings.- Happenings are unconventional and formless performances where audience involvement actually determines the course of the performance. Riley’s oil paintings were in a sense dependent on what the individual experienced on viewing them. Though the paintings were given names hinting at their subjects, they could be interpreted by the audience in any way.

Riley held the first of these exhibitions, which were pivotal in getting the world’s attention to the Op Art movement and Riley’s art, in 1965 at the Museum of Modern Art, New York City. She had already held her first solo in 1962 at Gallery One, London. Other exhibitions followed, but it was the 1965 show at New York that drew international recognition.

By 1967, Bridget Riley began to modify her style and thought of incorporating oil colour in her art. She began incorporating on colour stripes in an oil painting entitled -Paean- (1973), -Dominance Portfolio, Blue- (1977), -Ra2? (1981) and -Silvered 2? (1981). Crucial to this change was the extensive travelling she undertook from the 1970s. The hieroglyphic decorations she saw during her visit to Egypt played an important part in leading her to incorporate colour and contrast. Her later works are colourful and some of these bright paintings include -Fete- (1999), -Echo- (2000), -Carnival- (2000) and -Sylvan- (2000).

Among the other achievements of Bridget Riley is her distinction of becoming the first woman and British contemporary painter to receive the International Prize for painting at the 1968 Venice Biennale.

Using Artists Materials and supplies in a new and innovative way to pioneer a the Op Art movement in painting, Bridget Riley is undoubtedly one of Britain’s most important artists. Her geometric patterns skilfully created with Oil Paints have influenced many and have been appreciated by all sections of the audience.

Off-shore Instrument Technicians 4 Things You Should Know

Off-shore oil rigs are huge and as such need many people to keep things running efficiently. Among these, instrument technicians are some of the most in demand. Because the rig is in the middle of the sea, the salt in the water and air will damage the electrical, pneumatic and mechanical systems. This is where off-shore instrument technicians come in as without them oil rigs would not be able to function.

Job description

*As an instrument technician, you would have to install new machinery and equipment, maintain and monitor them and make sure they are in working order. For this, daily inspection has to be done to make sure there are no glitches.

Remuneration

*Off-shore jobs are very challenging and so remuneration is very good. Everyone on the rig – from the roustabouts to the technicians and supervisors – follows the same routine of 12-hour shifts, 7 to 14 days in a stretch and the same number of days off. On an average, instrument technicians get about $61,000 a year but this amount can differ from company to company. Job location and your experience level will also be factors.

Dangers

*While working on an off-shore oil rig, you will have to brave extreme weather and face the potential dangers of hurricanes and storms, and the fact that accidents, sometimes fatal ones, are more than a possibility. As an instrument technician, there is the added danger that you could get injured by the machinery or chemicals you have to handle.

Qualifications

*Instrument technicians must have a high school diploma and a degree in instrumentation or process technology, or an equivalent certificate/diploma from a recognized organization. If you don’t have the relevant qualifications, it would be a good idea to attend a two-year instrumentation technical course before applying. You will need to be a team player as most instrument technicians work in groups. You also must be able to troubleshoot and breakdown a problem logically so that you can solve it.

Though off-shore instrument technician jobs are in demand, they are difficult to get as they need a lot of technical skill and qualifications. At the end of the day, living on a rig can wear you down mentally and physically but if you feel you can handle the harsh environment, then go for it. But remember, that once you get the job, it doesn’t stop there: you have to keep learning, reading and updating yourself on new technologies.

Medical Instruments Part 3

Presenting an article discussing the different types of surgical instruments. HNM Medical releases articles describing in detail about medical procedures and medical instruments such as dilator, pessary, forceps and other medical tools.

Medical Instruments: Hurd Dissector Use: To Cut Info: Generally seen during surgery on the tonsils. A blunt retractor/dissector.

Medical Instruments: Jacob Tenaculum Use: To grasp Info: Common A clamp for grasping GYN.

Medical Instruments: Kerrison Ronguer Alias: Kerrison Punch Use: To cut the bone Info: To cut bone in spine & cranial surgery.

Medical Instruments: Key Elevator Use: To dissect

Medical Instruments: Klein Needle Use: Injection Info: Placed lipo fluid into the tissue to get the tissue for lipo suction.

Medical Instruments: K-Wire Cutter Use: To cut metal wires and K-wires.

Medical Instruments: Lambotte Osteotome Alias: Lambot Use: Dissection Info: Obtainable with both straight & curved at the tip. Often to take bone and hip grafts.

Medical Instruments: Grasper Alias: Debakey Grasped Use: Grasping Info: During laparoscopic surgery and for grabing the bowels.

Medical Instruments: Laparoscopic Trocar Use: Access for laparoscopic surgery. Info: The trocar is used for introduction of the port to the abdomen , but then removed to allow the instrument from the surgical instrument sets to be passed though.

Medical Instruments: Liposuction Cannula Alias: Lipo Cannula Use: To cut, mainly in saturated areas Info: Used to dissect and suction fat tissue during liposuction suction.

Medical Instruments: Curved Dissector Alias: Maryland Grasper, dolphin nose Use: Dissection Info: Used to dissect during cholecystomy surgery. Often is used to ligate vessels & is attached to a cautery cord.

Medical Instruments: Mayo-Hegar Needle Holder Alias: Needle Driver Use: To sutur Info: Available in a variety of sizes depending on the size of the needle to be used.

Medical Instruments: Metzenbaum Alias: Metz Use: Cutting Info: To cut tissue

Medical Instruments: Mouth gag extension Use: Postioning device Info: Mainly seen with patients with a bigger chest diameter, attaches to the Mayo stand.

Medical Instruments: Tongue Blade for Mouth Gag Use: Retraction Info: Attaches to the Davis Mouth gag to provide exposure for the tonsil procedure.

Are you interested in becoming a medical sales rep and work indepednetly? Then come to HNM Medical and see our independent medical representative application.

A “An Overview of Medical Instruments Part 2” article is by Tom O.

Page 2 of 4«1234»

Recent Posts

Copyright © 2022 LIVE IN